|Beginner's Guide | Return to Home Page
|BEGINNERS GUIDE TO SMOCKING
To view easy "learn to smock" projects, click here to open our "Projects" page.
With knowledge of only a few basic stitches, a beginner can create a large variety of geometric designs. (Even the more advanced technique of picture smocking is simply stacking rows of the most basic stitch--the cable--one on top of the other, creating large areas of color that are shaped into figures.)
The goal is to keep the strands from twisting together so they will lie flat on the fabric. A quicker way to achieve this is as follows: Thread the needle, knot the thread, pull the needle down to the knot & pull it back again, causing the strands to separate slightly. (This method can be repeated as you work across a row if strands twist together again. Simply pull the needle down the floss to the fabric & pull it back again.)
General "Rules" for Working Stitches
1. Most stitches are worked from left to right, sewing through or "picking up" approximately the top 1/3 of each pleat.*
2. Unless design directions indicate otherwise, stitches are typically worked with 3 strands embroidery floss.
3. Gathering threads are used as guides for keeping rows of stitching straight. 4. Needle is inserted into fabric parallel to the gathering thread.
5. The terms "thread up" and "thread down" in these direction are referring to the embroidery floss in relation to the needle. (Diagrams will help demonstrate this.)
*A left handed person will be working from right to left--just opposite directions. Holding printed pages upside down to study diagrams can be helpful.
The Cable Stitch
1. When grasping pleated fabric, thumb should be just below and parallel to the gathering thread. Although the gathering threads will be the main guides for keeping rows straight, the thumb can also be helpful if it is positioned as described. The forefinger may be outstretched above the gathering thread, or behind the fabric--whichever position is most comfortable.
2. Bring needle up from under side of pleated fabric. Bring needle through fabric on left side of first pleat to be stitched--approximately 1/3 the way down from the top of the pleat.
3. With thread down below needle, "pick up" top 1/3 of the next pleat (it's important that needle is inserted in the next pleat). Now, pull the 2 pleats firmly together. This stitch is referred to as a down cable or down stitch.
4. With thread up above needle, "pick up" top 1/3 of next pleat and pull pleats firmly together. This stitch is referred to as an up cable or up stitch.
5. Continue across row, alternating thread position (up or down) on each stitch. Remember, thread up to work an up cable and thread down to work a down cable.
6. To tie off thread at the end of a cable row (or any row of smocking), take needle down in valley just before last stitched pleat. Tie off on backside of fabric.
The Outline Stitch
This stitch is worked much the same as the cable stitch, except all stitches in a row are worked holding the thread in the same (up or down) position. The outline stitch shown on right is worked keeping thread down as each new pleat is "picked up."
The Baby-wave Stitch
(Rows numbers are simply to help explain this stitch.)
1. Work 1 cable (thread down) half way between rows 1 and 2. (This is referred to as row 1 1/2.)
2. With thread down, "pick up" next pleat on row 1. (Remember to keep needle level and parallel to gathering thread.)
3. With thread up, work 1 cable.
4. With thread up, "pick up" next pleat on row 1 1/2.
5. With thread down, work one cable, completing one baby-wave (and beginning another).
(A wave row can be created by repeating steps 2--5.)
The stitch described in steps 1--5 above is referred to as a 1/2 space baby-wave because it covers 1/2 space. A whole space baby-wave is worked the same except thread is carried one whole space between cable stitches. Refer to diagram on right.
General "rules" for working baby-wave
The Trellis Stitch (also referred to as step-stitch)
This stitch is much like the baby-wave except you take several "steps" between the top & bottom cables. There are many combinations of this stitch & also many ways of describing it in design directions. The 1/4 space step-stitch (meaning each stitch is worked 1/4 space apart) is described first. (Rows numbers are simply to help explain this stitch.)
1. Work one cable (thread down) on row 2.
2. Keeping thread down, "pick up" next pleat 1/4 space above gathering row, "pick up" next pleat 1/2 space above gathering row, then 3/4, then level with row 1. (Remember to keep needle level and parallel to gathering thread on each stitch.)
3. With thread up, work one cable on row 1.
4. Keeping thread up, "pick up" next pleat 1/4 space below gathering row, then 1/2, then 3/4, then level with row 2.
(A wave row can be created by repeating this sequence (steps 1--4).
As shown below, the trellis stitch may be worked between less or more than a whole space. Also, this stitch is sometimes described by the # of "steps" worked in a particular space. (Examples of common descriptions for this stitch are below diagrams.)
The trellis stitches described so far have been worked 1/4 space apart. Occasionally you will be directed to space these stitches closer together or further apart as shown below. (Examples of common descriptions for this stitch are below diagrams.)
General "rules" for working trellis stitch (are same as baby-wave)
These are the most common stitches used in smocking. With the exception of some popular accent stitches (french knot, lazy daisy, etc.) all of Creative Keepsakes' smocking designs were created from various combinations of these 4 stitches.
Copyright 2001 Creative Keepsakes, Inc.
Feel free to use these instructions for personal or instructional use. If used for instruction, please give credit to Creative Keepsakes and provide the URL http://creativekeepsake.com.
return to top